Smart Aerial by Advanced Diagnostics is used with the Smart Dongle to provide locksmiths with the ability to write pre-coding data onto various vehicle transponders. In particular, Smart Aerial is able to pre-code Fiat® and VAG® transponders from the electronic pre-coding stored in the vehicle and then write the pre-code data onto a blank transponder. Transponder Pre-Coding Simplify, streamline and reduce the overall time for programming keys by minimizing the use of additional pre-coding tools. Automatic Configuration Ready to use; automatically configures with Advanced Diagnostics Smart Dongle and programming Devices Data Reading and Writing Pre-coding data is seamlessly read and automatically written onto a blank transponder. Simply connect the Smart Aerial to a Smart Dongle that is used with an Advanced Diagnostics programming device, and insert the key into the dedicated key slot to begin the process. Pre-code Fiat® and VAG® Smart Aerial can pre-code data onto ID48 and ID46 transponders found within various automotive keys. The pincode reading software (ADS185 and ADS219) must be installed on the programming device before these transponders. Lightweight and Portable Easy to transport and compact enough to fit into your toll kit. Requires: • Programming Device; MVP Pro or T-Code Pro • Smart Dongle • Fiat Software: • ADS181 Fiat® Software • ADS258 Fiat® Software • ADS231 Fiat® 2015 Software • VW Software: • ADS115 VAG® • ADS146 VAG® Can • ADS219 VAG® • ADC222 (Force Ignition Tool) is also needed for use with Smart Aerial on VW Beetle (2006-2010)
OE #: TDB500
All new "Clone Wizard" developed by the great folks at The DIagnostic Box. Hands down, the simplest cloning device anywhere. The Clone Wizard comes with 25 exclusive colored chips (5 of each color) for easy identification.
1- Insert and read the key you wish to clone, click read
2- The Clone Wizard tells you what color chip to insert in your chipless shell
3- Insert your new shell with chip and click copy
4 - YOU ARE DONE!!
The Clone Wizard will also allow you to precode Fiat, Chrysler, Gm and Ram! It will also read chips, test remote frequencies, re-new some Toyota/Lexus smart keys
Visit www.wikiclone.com for full application list
SKU: AUTEL-MAXISYS ULTRA
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. It features a 12.9-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced AutoSCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan.
• Autel updates provide latest OE level coverage for more than 80 US Domestic, Asian and European vehicles, including supercar
• Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding and programming
• Automatic system and software updates with real-time push message notifications via internet
• Interactive Data Logging sessions enable direct contact with Autel Support for first-hand troubleshooting of diagnostic bugs and errors
• One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
• Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes+
Operating System Android 7.0 Processor Samsung Exynos8895V octa-core Processor (2.3GHz Quad-core Mongoose + 1.7GHz Quad-core A53) Memory 4GB RAM & 256GB On-board Memory Display 12.9 inch TFT-LCD with 2732 x 2048 resolution & capacitive touch screen Connectivity
WiFix2 (802.11 a/b/g/n/ac 2x2 MIMO)
BT v.2.1 + EDR
USB 2.0 (Two USB HOST Type A, one USB mini device)
SD Card (Support up to 256GB)
Rear: 16 Megapixel, Autofocus with Flashlight
- Front: 5 Megapixel
Sensors Gravity Accelerometer, Ambient Light Sensor (ALS) Audio Input/Output
- 3-Band 3.5 mm stereo/standard headset jack
Power and Battery
18000mAh 3.8 V lithium-polymer battery
- Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
Input Voltage 12V/3A Adapter Operating Temp. 0 to 50°C (32 to 122°F) Storage Temperature -20 to 60°C (-4 to 140°F) Dimensions (WxHxD) 366.5 mm (14.43") x 280.9 mm (11.06") x 34 mm (1.34") Weight 2.18kg (4.81 lb.)
DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)
SKU: AUTEL-IM608PRO (BF2020)Bundle Package Includes:
IM608 Pro Programmer
GBox2 for Mercedes
APB112 Smart Key Simulator
MaxiIM IM608 Pro with upgraded key programmer XP400 Pro is the most advanced key programming tool that combines the powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android-based 10.1-inch touchscreen tablet.EXISTING IM608 / IM508 / IM100* / IM600* USERS CAN UPGRADE TO IM608 PRO BY PURCHASING XP400Pro*IM100 and IM600 will not have 4 channel Labscope software and AutoAuth available with XP400PRO add-onFACEBOOK SUPPORT PAGE: https://www.facebook.com/groups/236385490254160/VEHICLE COVERAGE LOOKUP: https://www.autel.com/vehicle-coverage/coverage2The MaxiIM IM608 Pro features an automated and guided Smart Mode to help technicians perform key learning effortlessly. An Expert Mode provides experienced technicians with quick access to desired functions.In comparison with its predecessor IM608, the new device feature the following new additions:BMW EWS3 key learning (with APB114 adapter)Mercedes-Benz W209 EIZ read/write/erase (with APB118 adapter)OEM Mercedes-Benz NEC key learning (with APB115 adapter)Read/write DataEEPROM - added 60 chip types, now supports 445 types (with APB119, 121, 122, 123 and 126 adapters);MCU - added 32 chip types, now supports 2067 types (with APB120, 127 and 128 adapters);Odometer – will add 162 chip types, will be able to support 171 types in July;Engine ECU – added 1 chip type, now supports 41 chip types;Immobilizer ECU – added 3 chip types, now supports 181 chip types.Key unlock – supports 11 key types (with APB113 adapters).In a glance, the MaxiIM IM608 Pro supports all the functions of the previous MaxiIM IM608 with a more powerful and stable performance of key functions, including read/write keys, read/write chips, and read/write Mercedes infrared key with a more stable EEPROM platform.IMMO FunctionsAuto Detect Make/Model/Year/SystemRead PIN (All Key Lost)Key LearningIMMO ECU Reset/AdaptionIMMO ECU Refresh/CodingRemote LearningAUDI Q5/A4/A5 2015-2017 Key LearningVW MQB Key LearningBMW FEM/BDC Key Learning and AdaptionBMW CAS4 Key Learning and AdaptionMercedes Key Learning2015-2018 Land Rover & Jaguar write key via dumpVolvo Smart Key Learning/knob-style smart keyAdvanced Programming FunctionsEEPROM Read/WriteMCU Read/WriteKey ProgrammingMercedes Key Read/WriteRemote Frequency DetectOE-Level DiagnosticsCompatible with more than 80 vehicle makesAll system diagnosticsWork with the MaxiFlash JVCI (J2534 ECU Reprogrammer)Advanced Service FunctionsOil Service ResetParking Brake Pad Relearn After ReplacementSteering Angle Sensor RelearnBattery Registration and ResetDiesel Particulate Filter RegenerationTire Pressure Monitoring SystemActive TestECU CodingVW/Audi Component ProtectionComplete Service FunctionsXP400Pro adds support for following chips：EEPROM-->>AMD-->>AM29FXXX series chipEEPROM-->> FUJITSU-->> MB29FXXX series chipEEPROM-->> ST-->> M29FXXX series chipEngine control module-->> ST-->> M29FXXX series chipIMMO-->> BENZ-->> ESL_W209_W906 (Motorola) read/write/erase functionIMMO-->> BMW-->>EWS3 module read/write functionREMOTE_RENEW(renew key)-->> NEC-->> V51 and V5 chip read/write/eraseXP400 Pro adds support for following adaptor board:APB113 PCF79XXadaptor boardAPB114 EWS3 adaptor boardAPB115 NEC Adapter boardAPB118 NEC ELV adaptor boardAPB119 TB28FXXXadaptor boardAPB120 TMS370adaptor boardAPB121 AM29FXXX Adapter boardAPB122 AM29FXXX adaptor board1APB123 AM29FXXX adaptor board2APB126 M35080/D80 adaptor boardAPB127 MC68HC0(7)05BXX adaptor boardAPB128 MC68HC05X32 adaptor boardSpecifications:15000 mAh Built-in Rechargeable Li-ion BatteryWi-FiMultilingual SupportLimited One Year Warranty1-inch Touchscreen64GB MemoryHexa-core Processor0 Megapixel Camera1920x1200 ResolutionMaxiIM IM608 Pro includes:MaxiIM IM608 TabletXP400 Pro Key ProgrammerMaxiFlash JVCI ECU ReprogrammerCarry CaseCables, cords and adapters:- Main Cable- USB Cable (2m)- Mini USB Cable- AC/DC Adapter (12V)- Light Fuse - 6*30mm (2pcs)- Cigarette Lighter- AAC001- APC101 (USB Cable)- APB129 (EEPROM Adapter)- APB125 (Mercedes Infrared Collector)- APB103 (MCU_PLCC52)- APB104 (MCU_FQFP64)- APB105 (MCU_FQFP80)- APB106 (MCU_FQFP112)- APB107 (MCU_FQFP144)- APB108 (MCU_FQFP176)- APB109- APB110 (MCU_FQFP176)- APB111 (MCU_FQFP176)- APA002 (EEPROM Socket)- APA101 (Signal Cable)- APA103 (EEPROM Clamp)- APA107 (ECU Clamp)- APA108 (MCU Clamp)- APA109 (MC9S12 Clamp)- Connect CableMaxiIM IM608+IMKPA Pro includes:Everything that IM608 Pro includes + IMKPA Accessory Kit
SKU: XH-VVDI KEY TOOL PLUS
The Key Tool Plus is all of your Xhorse Programmers in one! This powerful tool includes all features of the VVDI2, VVDI MB and Key Tool Max!Key Tool Functions:• Includes 96Bit Cloning Software• Tokens can be Purchased or Earned• Transponder Detection / Cloning / Generation• Remote Cloning / Generation / Renewing• Frequency Detection• IC / ID Cloning
Make A Key Function:• Supports Jag / Land Rover / Porsche / Volvo / Mitsubishi and More• IMMO Programming• Dash Light Reset• Key-Cutting Machine Controls• IMPORTANT TO NOTE: YOU CANNOT PURCHASE THE ANNUAL MB PACKAGE FOR THIS TOOL, TOKENS MUST BE PURCHASED INDIVIDUALLY OR IN PACKS!
Hardware:• CPU 8-Core 2GHz• RAM+ROM - 4G+128G• 10.1' HD Anti-Glare Screen• 13MP Rear HD Camera• 10000 MAH Large Capacity Lithium Battery• PD3.0 Fast Charge• OBD Power Supply• 5.0 Bluetooth• WiFi 2.4 / 5
OE #: T-NINJA 1000
SKU: TPDN-TNINJA1000Product Highlights:Cost-effective; low price to meet the economic crisis and pay for itself in just one use.Online Technical Assistance Center with a constantly updated database.Regular updates for supported vehicles and future vehicles.Does not require internet or server connection to program keys.No tokens required. Unlimited uses.No battery issue. Plug and program keys.Includes 12 Months of updates and warranty.
Features:Real-Time easy to use guided operationSupport for most North American vehicles and Japanese brandsStep by step guidancePin code reading (most vehicles)No soldering or EEPROMKey GenerationKey LearningRemote LearningKey DeletionAll Keys Lost and moreAll programming is done by OBD
Specifications:Operating System: Rt-threadCPU: ARM Cortex-M4, 180MHzDisplay: 5.0” TFT LCD, 800*480 ResolutionMemory: 256M RAM, 128M ROM, 16G Micro SDMaterial: ABS Plastic Shell, Silicone Button Starting time: ≤3SConnectivity: USB1.1OBD Interface: OBD-II 16PINBuzzer: 85db / min at10cmCurrent: 500mA (typical)Input Voltage: DV 12VPower Consumption: 1.8W (typical)Battery: 350mAh Button Battery (not rechargeable)Working Humidity: ≤95% RHWorking Voltage: 12V ± 25%Working Temperature: 14℉ - 131℉ ( 10°C - 55°C)Storage Temperature:Dimensions: 231.5*141.5*35mm (9.11*5.57*1.38 inches)Weight: 480g (16.93oz)Dimensions: 17" x 13.5” x 4.5” (Shipping)Weight: 7 LBS. (Shipping)
Includes:T-NINJA 1000 Programming TabletDiagnostic cableUSB 2.0 Micro SD ReaderPower AdapterUSB CableQuick-Start GuideBlow Molded Storage Case
OE #: IKS-MUSTANGCABLE-1
* For Use With The Code Cannibal or Smart Pro Only * Use this cable on Ford 2016+ when there is an active alarm and it will allow you to read the eeprom so that you can add keys or perform a clear/erase even though All Keys are lost.
OE #: TS608
COMPLETE TPMS & ALL SYSTEM SERVICE TABLET TOOL As the first comprehensive TPMS & Diagnostic tool in the market, MaxiTPMS TS608 provides you with superior experience in TPMS health check, sensor programming, TPMS relearn, all system diagnostics as well as special service functions. Equipped with a 7-inch touch screen with 1024 * 600P resolution and a VCI mini for wireless communication with the test vehicle, powered by the quad-core Cortex-A9 processor for smooth operation and featured by advanced TPMS & Diagnostic technology, MaxiTPMS TS608 is setting new standards for TPMS service tools. COMPLETE TPMS FUNCTIONS 1.Activate all known TPMS sensors and read sensor status; 2.Diagnose ECU for complete TPMS health check with DTC description; 3.Read DTCs from ECU and erase DTCs; 4.Program MX-Sensors by copying original sensor IDs or creating new IDs randomly; 5.On-tool relearn procedure and wide OBD relearn coverage; 6.Toolkit, special TPMS functions;
SKU: XH-VVDI KEY TOOL PLUS-TRADE IN
Special offer! Receive $200 off of the Key Tool Plus with a Key Tool Max Trade! Your trade-in unit and charger must be shipped back within 14 days of purchase date and in good, working condition.